View Single Post
kdjones2000 kdjones2000 is offline
In the Fires of Hell.....
 
kdjones2000's Avatar
 
Join Date: Oct 2007
Location: Phoenix, AZ
Posts: 2,753
Garage
Just get some M8x40mm bolts and cut/grind them down to 35mm...

I used a dull metal putty knife to clean up the gasket, working carefully. Finished it off with some Simple Green before putting the gasket on dry.

Looks like good progress.
__________________
'88 951S - with LBE, Guru chips, 3Bar FPR, 1.3mm shimmed WG
3300 lbs, 256 RWHP, 15 psig boost
"Certified National PCA Instructor" Hoooohah!
1987 924S 944 SPEC racecar - '88 pistons/DME, short 5th
Old 05-14-2018, 05:50 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #48 (permalink)