Thread: Aem 30-300
View Single Post
'76 911S 3.0 '76 911S 3.0 is offline
Registered User
 
'76 911S 3.0's Avatar
 
Join Date: Aug 2004
Posts: 936
Garage
Always crimp. Soldering makes the wire rigid and will become brittle over time. A good crimp will last the lifetime of the harness. I know there will be other people with other schools of thought on this one that will more than likely chime in; however, I have built motorsport (milspec) harnessing for the last 6 years and have never once soldered wires together (unless a factory connector called for it like the 14 pin connector in the engine compartment). I have also never had a failure of a crimp after it passed the pull test.
__________________
-Jayson
1976 911S Signature Edition - 3.2SSt (JE 98mm 9.5:1 pistons, 964 Cams, ARP Rod Bolts, Big Port SC Heads, 3.2 Carrera Manifold, ID725's, B&B Headers, TS HyperGate45 Gen V, TS RacePort, BW S360, AEM Infinity 506, E85)
IG: Signature_911
Old 06-04-2018, 04:12 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)