View Single Post
puddy puddy is offline
Registered User
 
puddy's Avatar
 
Join Date: Sep 2013
Location: Ontario, Canada
Posts: 1,764
Garage
Wow it seems my flares are really off.

Perhaps i'm measuring wrong but I measured the length of threads below the jam nuts on my rear coil over bodies for each side.

On the Drive side i had 7" of threads on the Pass side is have 7.75" of thread, which should indicate the Pass side rear is higher as the spring is compressed more. Correct? Yet my distance to the centre of the wheel opening down to the floor is different by about 1/2", the Driver side being higher. Strange.

Same seems to be true for the front but opposite, my Driver side front fender is closer to the floor than the Pass side. I guess i just live with it as I have for the last 4 years!
__________________
Cheers, Chris
1975 Carrera / 965 tribute w/ 1989 3.3 turbo 8.5:1, custom Evergreen K27 7200, 964 cams, euro CIS, TEC1 dual plug, rarlyL8 headers & hooligan pipe. 915/68 trans, kevlar clutch and lightweight pressure plate.
Old 08-15-2018, 08:36 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)