View Single Post
lightbulb8817 lightbulb8817 is offline
lightbulb8817's Avatar
Join Date: Dec 2015
Location: Southern California
Posts: 324
not sure if this is of any help, but try looking at the ISV to check out the percentage opening (with the one side boot removed) as you are cranking the motor or as the car is idling. you might be able to see if it's working properly or not that way.

on my car, i'm using a different aftermarket ECU but i had to program the ISV (with some help) and i can visually see the % opening of the gate i had it set to thru the ECU tuning software. with car off, the metal gate rests around the 40-45% opening position and wiggles around freely(almost spring like) when gently moving it with a q-tip. i had to experiment with it on my build as well but that's mostly due to the aftermarket ECU and getting that to talk with the various sensors and switches on my motor.

here are couple photos of mine:

Old 09-10-2018, 09:52 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)