View Single Post
gazzerr gazzerr is offline
Registered User
 
Join Date: Jul 2012
Location: GA
Posts: 841
You have to assemble the runners loosely so that when you torque down the runner bolts everything connected to them can adjust and find it's place. I found that the clips for the rubber runner connectors to the air box have to be tightened up last otherwise the rubber connectors will get crushed. This is impossible to do with the number 6 rubber connector with the engine in the car because the clips have to be done up with the screw facing the rear (away from you) of the engine bay in order for it to clear the fan shroud. It's a matter of having just that one pair tightened up and the runner in the correct orientation to meet the intake (and maybe number 5 too - don't remember) and hoping for the best. It's tough but doable.
Old 09-10-2018, 05:41 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #47 (permalink)