View Single Post
47silver 47silver is offline
Even a Bad day is good
 
47silver's Avatar
 
Join Date: Sep 2002
Location: Pittsburgh
Posts: 2,327
Garage
prep and etch

would it make sense to use something like prep and etch or the por 15 metal ready after this process? i do not want to seal it with a liner but was reading that these leave a bonded coating and that the por-15 product is a zinc phosphate coating. others use a mix of auto transmission fluid and marvel to coat the inside.
i wont have gas in it for a week or so .
any advice will or experiences are appeciated.
__________________
1975 911S Targa
Silver Anniversary Edition
Old 09-14-2018, 06:34 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)