View Single Post
DannoXYZ DannoXYZ is offline
Registered User
 
Join Date: Feb 2003
Location: SF East Bay
Posts: 1,854
Also DO NOT pull on injector wires to remove them. Due to old crispy wiring, you'll cause more damage that may appear to be injector-related.

To properly remove injector connector:

1. Locate locking square-spring at tip of connector
2. Pry off spring ends with precision screwdriver
3. Hold plastic body (not wires) of injector connector to pull off




Might as well slice off rubber boot to verify wiring inside isn't cracked or broken just before it enters plastic connector body.



If your wiring is cracked or broken, you can cut it out and butt splce in replacement injector pigtail from Napa. In parts list here: DIY - Harness Connectors

Last edited by DannoXYZ; 01-12-2019 at 12:23 PM..
Old 01-12-2019, 12:09 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)