View Single Post
91 XR7 91 XR7 is offline
Registered User
 
Join Date: Nov 2003
Location: Vancouver Canada Eh...
Posts: 14
Front strut housings pt 2?

Hello all

Just a continuation from my post in the 914 section but this time about 911 Strut housing. Same initial spew about whats up....

Working on some nice replicas here using 911 and 914 front suspensions and i'm turning crossed eyed over the number of different strut housings and hope some on here can help out in clarifying/identifying what i have to play with!

So as attached are strut housings of question.





Okay Left strut housing has the 18MM axle retainer nut thread, the other two are 16mm
The two outer strut housings have a 3.5" spacing, the center only 3" spacing
The Center strut housing the Caliper mounting part if off set away from the tube.

I only have a pair of the center housings, and need mates for the two outer housings. Also need to figure out if the Hubs (if they are all the same) and Calipers! (the later shouldn't be as bad!)

Thank you all
Kevin

Link to the 914 aspect of this same problem
Old 01-25-2019, 09:52 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)