View Single Post
Cappt Cappt is offline
Registered User
 
Join Date: Sep 2019
Location: Reno NV
Posts: 20
Garage
Quote:
Originally Posted by v2rocket_aka944 View Post
get a 10mm wrench and climb into the trunk again, pull back the carpet, and loosen (don't need to fully remove) the 10mm nuts holding the latch to the body.

this will let go of its kung-fu grip on the hatch pins and you can wiggle it off
This^^ Easy to do. To re-adjust loosen the two 10mm on both sides and set the trunk hatch down onto the latches but not all the way. Climb back into the trunk and tighten down the 10mm's on both sides. The latches should now be properly aligned with the hatch pins.
Old 11-07-2019, 08:09 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)