View Single Post
pfarah pfarah is offline
pfarah's Avatar
Join Date: May 2012
Location: Plymouth MA
Posts: 1,388
Continuing work:

1. Flywheel out for re-surfacing; the thickness is currently at 14.25mm so it should be fine after machining:

2. Rear main seal and pilot bearing out:

3. Engine cleaned up:

4. Lower balance shaft removed, found a crack in one of the bearings:
1984 944 NA, constant tinkering
Old 11-11-2019, 04:41 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)