View Single Post
BGCarrera32 BGCarrera32 is offline
Certified Pre-Owned
 
BGCarrera32's Avatar
 
Join Date: Aug 2002
Location: Nanny State (MN)
Posts: 3,121
Quote:
Originally posted by Chuck Moreland
The factory seat position is not centered on the steering wheel. The seat is skewed slightly to the center of the car. Sounds like your solution is about the same.
No offense but I disagree... in fact if you look at the bracket near the door you can see its bent out and at an angle a good inch away from the unit body. Now, it may not be perfect centering, but its much worse with the brackets removed. When I ground out the factory brackets with a death wheel and then just shoved the factory seat down in there almost to the floor board, the seat was shoved way left (closer to the driver's door). If only that tunnel was an inch or so narrower...but I'm not going there...
__________________
'84 Carrera Coupe
Old 12-15-2003, 10:40 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)