View Single Post
speedracer92 speedracer92 is offline
Registered
 
speedracer92's Avatar
 
Join Date: Apr 2019
Location: The Woodlands, TX
Posts: 312
Help with wires going to POS battery post and drain on it

Tried to start my car (87 Targa) after a week sitting and the battery was completely dead. Put a charger on it and never would get past 41%. Tried to jump it and the clip was too large on the cables and as I was moving it to get a good connection, broke off a wire connected to it (see pic below). It broke off pretty easily and when I touched the wire to the pos post it sizzled a bit.

The only change I made to the car is installation of the F9 DME and the car ran fine after that.

Iím going to get the battery checked but two questions:

1.) Where can I find in the manual what these wires go to?
2.) Is there any possible reason the DME would cause a drain on the battery?

Thanks in advance for any thoughts.



__________________
Todd
1987 911 Carrera Targa
Old 04-10-2020, 06:32 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)