View Single Post
BCLi BCLi is offline
77 Restorer
Join Date: Mar 2020
Location: SoCal
Posts: 21
Originally Posted by darrin View Post
No, the light frame should not ground to the roof -- in fact, it needs to be isolated from the roof, as it's always getting power from the always on positive (but is disconnected from both potential grounds in the center position) -- the door pin "ground" completes the circuit only when the door's open (causing the door pin switch to complete grout) and turns the light on when shifted to one side -- the light's always on when switched to the other side (causing the always hot ground wire to complete the circuit) -- might want to check the action of the switch with a voltmeter to confirm that both of its circuits work

Thanks Darrin. I will check the switch and see if the continuous ground is working. Thanks very much for the input.
77 911 Targa (Maize, or Talbot yellow as the case may be)
04 C4S Cabriolet (sold)
Old 06-07-2020, 05:46 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)