View Single Post
tx996tt tx996tt is offline
Registered
 
Join Date: Oct 2010
Posts: 14
Not sure about the 2.7 but here is a data point regarding HP potential:

3.0 SC with Paxton SN2000HO- custom built kit not from SOK
964 Cams
Haltech stand alone efi
Custom fab intake using 70mm Ford throttle body
8.9:1 static compression - custom JE pistons with ductile rings
ARP head studs and rod bolts
Long tube headers and custom exhaust

270whp at .61 bar (9 psi) blowing thru a modified 930 intercooler. This was a serpentine belt set set up using Ford belt tensioner and idler pulley.

We converted to turbo so removed from car. I still have the Paxton head unit, stainless mounting bracket to get it on the motor and the tensioners. All other parts to complete are not available.

Willing to sell for $600. PM if you have interest.
Note: you will need to have a serpentine crank pulley machined, A/C pulley modified for serpentine belt, plus get it plumb to the throttle body.
Old 06-29-2020, 03:46 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)