View Single Post
MBAtarga MBAtarga is online now
Registered
 
MBAtarga's Avatar
 
Join Date: Jul 2001
Location: Lawrenceville GA 30045
Posts: 6,035
If you've got a "permanent" location for the shop - I'd say go ahead and get the contractor model saw.
Routers can be used for the dado options when needed for the most part. However, if you're into making box joints for drawers and boxes - the dado stack on the table saw would be MUCH more accurate.

Here's my Sawstop setup that replaced my Delta saw. The table structure behind it was then modified to fit the larger Sawstop footprint, so I've got a full 8' by 8' work surface including the saw table. This is the 52" version cabinet model. Dust collection and power to the saw are in a trough you see to the right of the cabinet.
__________________
Mark

'83 SC Targa - since 5/5/2001
'06 911 S Aerokit - from 5/2/2016 to 11/14/2018
Old 11-20-2020, 06:41 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #150 (permalink)