View Single Post
racer racer is offline
Registered
 
racer's Avatar
 
Join Date: Jan 2004
Location: Northern Virginia
Posts: 3,324
the issue will be rubbing on the rear. Narrow rear fenders on the early cars.. 225 will likely be too large and rub (assuming you don't have flares). Can you fit your fingers between the fender and the tire currently with the 205 on the rear?

The usual caveats apply:
1) Ride height
2) alignment (negative camber)
3) tire size (not all tires are the same size despite the same number. Some 225's are a bit wider, some a bit narrower)
4) Rims being used.. and therefore factory offset or other?
5) spring/torsion bar rate
etc etc.
__________________
1970 914-6
1987 924S
Past:
2000 Boxster 2.7, 1987 944
1978 911SC, 1976 914 2.0, 1970 914 w/2056
Old 12-11-2020, 03:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)