[surfdogskier]

Evidently I have some issues with my engine harness. I plug up the black/purple wire from on the coil and it kills my engine. Something is shorting in the wire evidently. I can direct wire it from the coil to the tach and it works. Also, the black and red wire looks messed up on the positive side of the coil.

Can I direct new wire from the coil to the outs on the relay board without going through the board or do I need them to go through it or other connections needed. I don't know of any other wires that need to be address in this harness. I converted from fuel injection to carbs.

Thanks