View Single Post
Swamper Swamper is offline
Been Nowhere Done Nothing
 
Join Date: Sep 2020
Posts: 104
Found an old thread here.
I've been trying to dial in my Sag with these newly purchased Ohlin shocks I had built. Are most of you using the 30% front 25% rear formula. My shock builder said they would be built and shouldn't need any adjustment out of the box. I think the bike is actually riding fairly well but I haven't been able to push it hard in the turns. It seems to be tracking good. I've checked the Sag and the rear is right on the 25% but the front is at 26.4%. I'm thinking of adjusting the front Preload to get it to 30%. It's at 29mm and my figures show it should be 33mm so a little under 3/16". Plan to loosen the preload ring a turn and a half. I've been told one turn usually equals 1/8".
Does this sound right to you guys with the experience setting up the S suspension?
__________________
02 R1100S, 05 R1100S BCR
02R1150R, 02 R1150R ABS, 04 R1150R
16 S1000XR
Old 02-20-2021, 07:11 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #27 (permalink)