View Single Post
Avery Avery is offline
...is my Daughter
 
Avery's Avatar
 
Join Date: Nov 2001
Location: San Francisco Bay Area
Posts: 878
I used SEM Multi-purpose adhesive (part number 39957). It's used to bond FG to steel panels. The nice thing about it is it has a 60 minute cure time so you don't have to work very fast before it sets. The stupid thing about this stuff is you have to buy the SEM gun which is fairly expensive. I could loan you my gun if we could work out a deposit agreement (Like I said, this thing was expensive).

I finally got my hosed PC to work. Here's some additional pictures. You have to have a "strong stomach" to cut into these cars. After you start cutting, there's not turning back!


Note: the rust that you see flashed overnight. It was fully sanded off before the epoxy was applied. (Just so you know).



__________________
Keep Going!

Felmir Singson RGruppe #479
"Living the rest of my life, one minute at a time"
Old 01-30-2004, 12:18 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #22 (permalink)