Thread: Pulley Problems
View Single Post
Par911 Par911 is offline
Registered
 
Par911's Avatar
 
Join Date: May 2003
Location: DMV
Posts: 1,432
Grady and Tab, thank you both for your feedback on why this problem occurred. It makes much more sense to me now. Come to think of it, I remember seeing a couple shims off centered before I first removed the old pulley.
Bill, even though the problem was fixed, I may still need your help putting a shim back in place. As you can see in the pic below, one of the shims is off-center. It's odd because when I was tightening the nut I made sure that all six shims were centered.

I currently have 3 shims on the inside and 3 on the outside of the fan pulley. I appreciate all the help.
Old 01-30-2004, 02:00 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)