View Single Post
techguy techguy is offline
Registered User
 
techguy's Avatar
 
Join Date: Oct 2002
Location: Toronto Ontario, Canada
Posts: 214
Glue

Just a note on the use of thr superglue, it can damage the bushing if for some reason you have to remove the plate after the installation. The glue is more of an aid in the assembly and install process v.s. providing any holding power once the bushings are in the car. Think about it, all the weight and pressure on the bushings plus the slight but constant movement of the bushings as the car goes down the road. In other words once in the car the glue is going to eventually release anyways and with it the rubber around the post will tear with some hardened glue holding on the rubber and some on the metal. I know this well after completing the same job last spring on my 72. The only difference being my plates are not adjustable so it took 2 tries to get them set bang on by installing and removing the plate.

Good Luck!
__________________
TechGuy
1972 Targa 911T/S 2.7
PCA Upper Canada Region
Old 01-31-2004, 07:26 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)