View Single Post
rfw 911 rfw 911 is offline
Registered User
 
Join Date: Mar 2002
Location: Union County, NJ
Posts: 191
seat height

I had this problem in my Euro Carrera,
I am 5' 10" and with the helmet on I had to srunch my
butt forward to keep from ending up compresing all
of the disks in my neck! Needless to say this didnt
make having the harness on a worthwhile thing since I could slide all around.

On my stock seats between the mounting tracks and the seat bottom I found that there was a stack of 2 aluminun spacer blocks
that are approx. 3/4" each. I removed them and re-installed the seat without them, I had to get some 8MM (?) grade 8 bolts that were only about 1 1'4 long. It was a bear to get in there with a
socket but the end result was well worth it. I still have to do the other side. I think the way to go is probably to use allen bolts so there isnt any issue with the sockets.

Good Luck!

Rich
77 Carrera 3.0 (Euro)
Old 02-03-2004, 05:21 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)