View Single Post
jluetjen jluetjen is offline
Registered User
 
jluetjen's Avatar
 
Join Date: Oct 2001
Location: Westford, MA USA
Posts: 8,592
Garage
While were at it, does anyone have information on the different spring pressures. The stock spring data was listed by racing97 (and elsewhere on this BBS), does anyone have data on the Aasco springs or other products. Do they all have the same pressures?

This is of interest to me since I'm building a full-race motor that will most likely be rev-limited by the mandated 34mm venturis in the carbs. So while it looks like I need more pressure to deal with the cams' acceleration, I'd rather not run any more pressure then I need in the interest of reduced wear and friction.
__________________
John
'69 911E

"It's a poor craftsman who blames their tools" -- Unknown
"Any suspension -- no matter how poorly designed -- can be made to work reasonably well if you just stop it from moving." -- Colin Chapman
Old 07-20-2004, 02:51 PM
  Pelican Parts Technical Article Directory    Reply With Quote #12 (permalink)