View Single Post
Clowd Clowd is offline
Registered User
 
Join Date: Jul 2004
Location: New Hamsphire (United States)
Posts: 427
So, I should have just went with my original plan?

In the first place I was just going to attach these blue wires: http://www.ueak.net/chayes/wires1.jpg

to the relays: http://www.ueak.net/chayes/wires2.jpg (there's another one of the same blue wires on the other relay)

Then, the yellow wire on one of them is attached to a ground wire, but the yellow wire on the other one isn't connected to anything?

http://www.ueak.net/chayes/Wiring1/Image05.jpg
http://www.ueak.net/chayes/Wiring1/Image06.jpg

The two relays are bridged, with white wire on one side and black on the other, and some sort of connector in the middle:
http://www.ueak.net/chayes/Wiring1/Image01.jpg

And, there are some other connectors, and I have no idea where they could go, there's nothing under there that they would plug into:
http://www.ueak.net/chayes/Wiring1/Image02.jpg
http://www.ueak.net/chayes/Wiring1/Image03.jpg

Here's the whole thing, for reference:
http://www.ueak.net/chayes/Wiring1/Image07.jpg
Old 08-17-2004, 06:14 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)