Thread: Engine Runs!!!!
View Single Post
magic930 magic930 is offline
Registered User
 
magic930's Avatar
 
Join Date: Apr 2003
Location: Carnation, WA
Posts: 623
Exasperating day yesterday. The car would not start at all after its first oil change the day before. I was testing everything from coils to injectors etc, pulling plugs to see if they were fouled. etc. Finally this morning after messing around with timing and fuel maps, increasing the fuel pressure from 45 to 50psi and the clincher turning off sequential injection, the car started and ran really well. I need to check my cam sensor since the sequential injection is dependent on it. It would not maintain an idle well when cold but ran smoothly through the rpm range up to 6000RPM.
So I took it for a drive! I have slight hestitation at lower rpms. But great acceleration after 3000RPM. Under load the fuel ratio looks good around 13.1 but when just cruising its running lean. When I returned from the drive I actually had a pretty good idle though it was hunting from 950 to 1000.
__________________
David
Old 09-26-2004, 10:38 AM
  Pelican Parts Technical Article Directory    Reply With Quote #8 (permalink)