View Single Post
Tinker Tinker is offline
Registered User
 
Join Date: Jan 2002
Posts: 604
Doesn't look to bad to me.

Put it in either first or third (push the shaft in or out to engage a gear) and then second or fourth and check with your straight edge.

It would need to have a pretty noticable bend to cause a leak. The shift shaft is pretty strong, unless you bent it with a floor jack while raising.

Now that you got it out, do yourself a favor and clean the case so you don't get gear oil/grease every where while installing.

Tinker

Last edited by Tinker; 10-09-2004 at 06:24 PM..
Old 10-09-2004, 06:21 PM
  Pelican Parts Technical Article Directory    Reply With Quote #14 (permalink)