View Single Post
beepbeep beepbeep is offline
Registered User
 
beepbeep's Avatar
 
Join Date: Jun 2001
Location: Sweden
Posts: 5,562
Quote:
Originally posted by dd74
Beepbeep - what about the otherwise stock 3.0 stuff, such as the CIS pistons? Would the TEC3 make a dramatic difference while still using the CIS pistons? And how radical a cam can be used with CIS pistons along with TEC3?
Well I don't think there are problems tied to use of CIS-pistons with EFI itself. Pistons don't know if fuel has been injected by CIS or EFI. (Tbit'z SC EFI conversiond are running w/o problems).

Only potential problem I can would be piston/valve clearance , depending on lift/duration/timing. It's very hard to answer that question w/o knowing cam specs, and even then it's probably prudent to do a test-assembly and check clearance. Cam seller should have guidelines as well.

(Using term CIS-pistons is somewhat misleading, as 930 pistons are also "CIS-pistons" but their design is totally different from SC-ones- no squish, flat tops)
__________________
Thank you for your time,
Old 12-05-2004, 09:40 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)