View Single Post
aturboman aturboman is offline
Registered
 
Join Date: Apr 2003
Location: California
Posts: 1,427
Check to see if the port is plugged in the throttle housing. The hole is very small and I've seen one clogged from coked oil. Some of the ports are also covered by the side of the butterfly and are only exposed as the butterfly is just cracked open. The only way you can see this is if you remove the throttle body and look from under the butterfly. I know there were alot of variations of throttle bodies based and year and market. I have a Euro throttle body and California version both from a 79 turbo, they have vastly different porting although they appear similar from the outside.The factory book is also incomplete (incorrect) on the routing of some vaccum lines.

Last edited by aturboman; 12-20-2004 at 12:59 PM..
Old 12-20-2004, 12:51 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)