View Single Post
YTNUKLR YTNUKLR is offline
up-fixing der car(ma)
 
YTNUKLR's Avatar
 
Join Date: Aug 2002
Location: Fremont, CA
Posts: 3,726
Garage
Send a message via AIM to YTNUKLR
Do you really want to buy something that was "R&D"'ed by MotorMeister? Especially, for $3k? With the Andial 104mm set-up you can make your 3.0 into a 3.6. You still need to bore out your spigots. You can also go the more often done Mahle 100mm or 98mm P/C (JE or Mahle), for a Short-stroke 3.3 or 3.2, respectively. The 98mm P/C don't require boring the spigots and they are what I am going to use on my engine. Take a good hard look at "Carrera3.5L" posts (Ralph). He built a 3.5 with Motronic that is really awesome. You'll see he recently dynoed it close to 250 RWHP-->~290 @ the flywheel. I definitely think you'd be happy with 290.

Bottom line: I wouldn't buy this set.

Plus, these guys are renowned for not knowing much about 911 engines...Here's another: 101mm pistons/cylinders will ONLY MAKE YOUR 3.0 into a 3.4, not a 3.6! It will, however, make a 3.2 into a 3.6 (3576cc). I think MM did a little false advertising.

Best luck, Scott

Last edited by YTNUKLR; 01-11-2005 at 06:09 PM..
Old 01-11-2005, 06:07 PM
  Pelican Parts Technical Article Directory    Reply With Quote #3 (permalink)