View Single Post
H.G.P. H.G.P. is offline
Registered User
 
H.G.P.'s Avatar
 
Join Date: Apr 2002
Posts: 1,492
Chain sprocket alignment..54.8 mm for the left chain not sure where to measure from.

Early case, L and R camshafts installed, now the sprocket alignment:

1. Front of case to intermediate shaft sprocket measured, and then

2. Straight edge to right side sprocket.

Both measurements same.

3. On to the left, I do not know where the straight edge should be located? And how the 54.8 is factored in.


Lastly on a side note.....with Ps and Cs in, heads, cam towers and camshafts and chains, but not the rockers, installed, my pulley nut I cannot really any longer turn it by hand. I can by wrench at around 15-18lbs. Sounds OK or not?

Thanks
__________________
1969 911 E Coupe
"Little Bull" "Horse"
"H." Heart, "G." Gears, and "P" the Porsche
Old 02-03-2005, 01:40 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)