View Single Post
kucharskimb kucharskimb is offline
Registered User
Join Date: Aug 2004
Location: Houston, TX
Posts: 895
for reference...

had my webers set up on the dyno with the same motor as you (2.4E with 9.6:1). in addition, i run a crane xr3000 ignition. i'm using 60 idle and 130 main with 34mm venturies. the emulsion tubes and airs are stock. so i only had to bump up the idle and mains one size...

prior to this, then engine was a stock 2.2E. the carbs were set up on the same dyno at 60 idle and 125 main, with 30mm venturies. all else the same.

hopefully this helps some.
72 911T Targa - Sold

Hang up the cell phone. Put down the Latte. Ignore the kids in the back seat.
Use your blinker when you want to change lanes. AND DRIVE YOUR Fu@#!NG CAR!!
Old 02-23-2005, 11:01 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)