View Single Post
BenI BenI is offline
Registered User
 
Join Date: Jul 1999
Location: Boulder, CO, USA
Posts: 392
You may be all over this but there's a little ambiguity in your previous posts...if you bought the bushing kit for the side shift setup the firewall bushing won't work. That is why Dave referred to a "converter" bushing. I don't know the answer to this...you could check if the ODs of the shift linkages at the firewall agree. If they do then you can use your old bushing here. The later bushing has too small of an OD for the firewall and will wobble in place.

Additionally, you can easily fabricate the outside solid mounts from some box iron if it helps...

You may also consider buying new shift linkage cone screws-there are two allen screws with conicle tips that hold the linkage together and can get worn. They are cheap and available from Pelican.

Good luck!
Old 03-10-2005, 03:23 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)