View Single Post
Henry Schmidt Henry Schmidt is offline
Try not, Do or Do not
 
Henry Schmidt's Avatar
 
Join Date: Apr 2004
Location: Fallbrook, Ca. 92028
Posts: 5,934
Garage
3.2 and 3.0 pistons have a different wrist pin location.
If you put 23 mm 3.2 pistons on a 3.0 engine crank and rod combination you will loose compression because of the stroke change and the increased deck height measurement. You can install the bushing with an off set of .030 (we do this all the time) which will increase the piston height but you can't replace the swept area lost by the crank.
__________________
Henry Schmidt
SUPERTEC PERFORMANCE
Ph: 760-728-3062
Email: supertec1@earthlink.net

Last edited by Henry Schmidt; 03-15-2005 at 12:08 PM..
Old 03-15-2005, 05:16 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)