View Single Post
KevinG KevinG is offline
Registered User
KevinG's Avatar
Join Date: Jan 2004
Location: Moorpark, CA
Posts: 241
Thanks, John - that was some thread!

My MFI hoses are routed as shown in Grady's picture. Although not in the picture, I have the MFI Pump inlet as the one on the right side (inside) of the pump, immediately above the oil lines. The outlet would then be the fitting next to the throttle body assembly on the drivers side.

I disconnected the inlet hose (the one coming from the bottom of the filter) at the pump fitting (above the oil lines) and stuck it into an empty 12oz beer bottle (lots of those lying around for some reason). A few seconds with the key in the on position nearly filled it.
1972 T Targa
Old 03-23-2005, 11:56 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)