View Single Post
magic930 magic930 is offline
Registered User
 
magic930's Avatar
 
Join Date: Apr 2003
Location: Carnation, WA
Posts: 623
When installing the rocker shaft it is important that the bore is completely clean and scratch free. I attached a piece of medium grit "wool" sanding pad to a long 1/4" wooden dowel, just fold a piece over the top of the dowel and tape with electrical tape, put that in a power drill and spin it in the bore, they cleaned and polished up nicely. Put the shafts in dry except for spray silicone to make sure the RSR seal slides in without binding up. 1400 miles no leaks so far!
__________________
David
Old 04-06-2005, 12:15 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)