View Single Post
CharlesJones CharlesJones is offline
Registered User
 
Join Date: Apr 2005
Location: Co. Carlow, Ireland
Posts: 455
I removed this plastic shroud/duct the other day, if I'm thinking of the same one. The non-blower end of it was connected to the engine by four bolts:-

2 bolts were behind the shroud, just in front of the inlet manifold for cylinder 1, and connect to the main horizontal engine shroud that sits immediately on top of the cylinders and heads.
1 bolt was on the right of the shroud, and held it to the fan housing imediately to the left of the fan.
And the final bolt was just beneath the shroud, on a lug which connects to the rear of the left side chain housing. This is the bolt which took a little bit of finding.

Its amazing how much better the engine looks with all this plastic removed - its a shame we can't junk it.
__________________
Charles

'84 911 3.2
Old 04-26-2005, 02:58 PM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)