View Single Post
JBTOOL JBTOOL is offline
Junior Member
 
JBTOOL's Avatar
 
Join Date: Apr 2005
Posts: 5
WHAT YOU DO IS INSTALL THE EXPANDER RING FIRST THEN THE OIL CONTROL RING THEN THE SCRAPERS ONE GOES UNDER THE CONTROL RING AND THE OTHER GOES OVER IT ,PUT THE EXPANDER AND CONTROL RING GAPS POINTING AT THE PIN ONE ON ONE SIDE ONE ON THE OTHER, THEN STAGER THE SCRAPERS POINTING UP LIKE ONE AT 10:30 AND AT2:00.NOW PUT ON COMPRESSION RINGS MAKE SURE YOU CHECK FOR MARKS SO YOU PUT ON POINTING UP THEN STAGER RING GAPS BELOW THE PIN LIKE 8:00 and4:00 .
Old 04-29-2005, 07:45 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)