View Single Post
350HP930 350HP930 is offline
Registered User
350HP930's Avatar
Join Date: Jun 2003
Location: St Petersburg, FL
Posts: 3,814
Even though my transaxle is still in great shape I am replacing my ring and pinion with the 8:39 set from andial so I figured I would give the whole tranny a rebuild 'while I am in there'.

So far I have pulled the pumpkin and disassembled, cleaned and visually inspected its components.

Since I have limited slip I wanted to make sure the friction disks and other components were still in good shape.

Fortunately the clutch pack, spider gears and everything else was in great shape so its good to know I don't need to do anything but put it back together after I have a chance to magnaflux a few critical components.

I took my camera into work that day so I took a few pics to share with everyone.

Here is the pumkin

And here are the greasy grimy guts

And here is everything all nice and clean. Its great having access to an industrial parts cleaner.
Old 04-30-2005, 08:11 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #179 (permalink)