View Single Post
Tinker Tinker is offline
Registered User
Join Date: Jan 2002
Posts: 604
They can. The wrist pin on the 3.3 are 23mm vs. 22mm on the 3.0. You would need to change the small end bushing and maybe have them offset to make up the compression ratio differences, if you want to get creative.

The 3.3 pistons are designed to be used with the 74.4 mm crank. With the 70.4mm crank on the 3.0 turbos, you will end up with something less than the 6.5:1 the 3.0 motor developed with 95mm p/c's.


Old 06-02-2005, 09:40 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)