View Single Post
Tidybuoy Tidybuoy is offline
Registered User
 
Tidybuoy's Avatar
 
Join Date: Jun 2003
Location: Fresno, CA
Posts: 6,471
Garage
The rear bumper is held on by 4 bolts, two in the trunk at the outer edges, and two that are located under the fenders.

I would loosen all 4 and see if you can wiggle the bumper around. Or, you might just want to remove all together and inspect. There are some brackets on the inside of the bumper that may have gotten bent. These are steel and may be able to be pounded back into shape.

Be careful when removing the bumper because there are wires going to the licence plate light - you will have to unplug these to remove the bumper.

If you've never taken off the bumper, you will be surprized how light it is - it feels like it is made of foil - that being said, it may have a bend in it.


Vern
__________________
Vern
'06 Cayman S - Arctic Silver, "R" Springs & Struts, Spyder 19" Wheels, 82mm Plenum & Throttle Body.
'74 911 Coupe - Silber Metalic, PMO ITB, Electromotive Mgt
'16 BMW R Nine T (the fun one) & '17 BMW G310R
Old 08-24-2005, 08:09 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)