View Single Post
1meansc 1meansc is offline
Registered User
 
1meansc's Avatar
 
Join Date: Feb 2005
Location: JHB, RSA
Posts: 178
A possible cause of the leakdown results could be broken rings. The caust could be compression ratio too high on one bank. This could be due to the case being machined or incorrect piston to head clearance on one bank or something similar.
I would recommend taking the motor out and srtipping down to the case. Make sure that all dimensions are comparred while stripping to compare LH & RH banks.
Old 09-05-2005, 09:58 PM
  Pelican Parts Technical Article Directory    Reply With Quote #4 (permalink)