View Single Post
Mark McClure Mark McClure is offline
Registered User
Join Date: Jul 2002
Location: Canberra Australia
Posts: 440
OK here is a picture of a view down the barrel as it is placed on the head on the bench. As you can see there is a ring around the base which is the chamfered edge. I will also put a closeup picture of the edge.

As you can see the machining has not been done very well.


Old 09-26-2005, 04:21 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)