View Single Post
camgrinder camgrinder is offline
Registered User
camgrinder's Avatar
Join Date: Feb 2004
Location: California
Posts: 921
1.26 mm is factory spec. I have had customers set them as far advanced as 2.0 mm. It depends on where you want an increase in HP.
If you 99% street drive the car set them at 1.4mm-1.6mm , track only set at 1.26mm. Its a slight shift at best, .3mm is about 1 degree of camshaft timing.
John Dougherty
Dougherty Racing Cams
Old 09-29-2005, 10:42 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)