View Single Post
Henry Schmidt Henry Schmidt is offline
Try not, Do or Do not
Henry Schmidt's Avatar
Join Date: Apr 2004
Location: Fallbrook, Ca. 92028
Posts: 5,942
What you are seeing is the slop or clearance between the flywheel and the flywheel bolts.
This is precisely why the 3.2 flywheel is pinned in place.
You can relocated the flywheel so the marks line up or just take the difference into account when using the flywheel mark for timing.
The latter is only a good idea if you will be the only one timing the engine.
A change like that, even that small, could drive the next guy
Henry Schmidt
Ph: 760-728-3062

Last edited by Henry Schmidt; 10-07-2005 at 11:35 AM..
Old 10-07-2005, 11:29 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)