View Single Post
ShoqAndAwe ShoqAndAwe is offline
Registered User
 
ShoqAndAwe's Avatar
 
Join Date: Jul 2005
Location: Houston, TX
Posts: 58
Garage
Quote:
Originally posted by Jim Sims
"Try starting car. - S U C C E S S"

You went down the checklist; did you find anything to correct? If not, you still may have an intermittent problem like a marginal electrical connector somewhere. Jim
Jim - Again thanks for the help and follow-up.

A few additional things I did was re-clean all the electrical connections on the Distributor and components with some rubbing alcohol. When I rebuilt, I found quite a bit of oil in the cap. I had cleaned all parts the first time but did it again anyway. Also, the ignitor three prong connection is not a very good/tight connection (#1 suspect) -- I also don't hear the whine which may or may not be an indication of weakening.

Tim - I think Jim is right - it wasn't h-locked. I think the ignitor three prong came loose during the initial drives. The reason I think this is that the car ran fine, turned it off, let it sit for a few hours, then no go.
__________________
'77 911 Targa 2.7
'05 Maserati Quattroporte
Old 10-12-2005, 06:43 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)