View Single Post
Henry Schmidt Henry Schmidt is offline
Try not, Do or Do not
Henry Schmidt's Avatar
Join Date: Apr 2004
Location: Fallbrook, Ca. 92028
Posts: 5,942
With "E" cams I would try to limit the compresion ratio to around 9.5 to 1. for two reasons cams and fuel quality.
2.2 "S" pistons on a 2.4 crank would put you way over that target figure.
From a compression ratio point of veiw only the "E" pistons might be better.
Henry Schmidt
Ph: 760-728-3062
Old 10-17-2005, 06:56 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)