View Single Post
Scott R Scott R is offline
Registered
 
Scott R's Avatar
 
Join Date: Feb 2001
Location: Aspen CO US
Posts: 15,302
Garage
Took this guy out and cleaned it up last weekend, no big deal. Remove the heater blower, and remove the heater blower bracket. Then remove the intake boot and then the throttle body itself. You can then reach down and remove the plug, the 10mm fuel line connection and the two allens.

When you put the new one in, make sure the o-ring is not on the notch, but in fact flush with the metal flange on the CSV. Get a finger or two under the plastic block that it threads through so you can lift it a bit to get the screws ligned up.

It took me about an hour to do this guy.
__________________
2018 Q5 Hybrid
2005 Cayenne Turbo
2012 Panamera 4S
1980 911 SC
1999 996 Cab
Old 10-18-2005, 03:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)