View Single Post
hobieboy hobieboy is offline
Registered User
 
Join Date: May 2002
Location: Up North
Posts: 1,439
The P&C will need to come out to replace the head studs so at a minimum, you'll need to remove the cam tower with the head as 1 piece, then pull the P&Cs.

Given this situation, I'd at least inspect the P&C and rings for tolerances. And I'd at least take the heads apart and inspect all the parts - spring, guides, rockers, ... then decide from there.

If you are confident, you don't need to open up the bottom end.
__________________
87 930 K27HFS/B&B/Twin-Plug... Megasquirted
Old 11-01-2005, 08:04 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)