View Single Post
ted ted is offline
likes to left foot brake.
ted's Avatar
Join Date: Jul 2002
Location: Sandy Eggo.
Posts: 4,265
Correct oil pressure sender for a 3.6 conversion?

Before the 3.6 conversion my old 3.2 oil sender and gauge appeared to be accurate.

I have since installed a 95 993 non V/R 3.6 and now my oil pressure gauge reads noticeably higher.

With the engine hot above 3k rpm it will indicate over 140lbs.

At 180 oil temp with two front coolers, no thermostat and a front oil sump could I really be seeing that high of pressure with a stock 3.6 oil pump?

I did install a 3.2 oil temp sender to correct the temperature readings.
Should I also install a 3.2 pressure sender?
Old 11-10-2005, 09:58 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)