Thread: Port & Polish
View Single Post
Mark McClure Mark McClure is offline
Registered User
 
Join Date: Jul 2002
Location: Canberra Australia
Posts: 440
Just got the heads back after having the guides redone, port and the 98 mm chamfer welded and machined back to 95........well that was the intention.

Having measured the combustion chamber I have found the following measurments......(mm) as you can see they are quite oval!

Vertical Horizontal
#1 97.92 96.24
#2 97.23 96.97
#3 97.80 95.89
#4 97.46 96.04
#5 96.73 95.67
#6 96.55 96.36

I have made no other measurments. So the question is..........if running 95mm cyl how uniform should the combustion chamber be and are these figures acceptable.

Thanks

Mark......
Old 11-25-2005, 04:51 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #31 (permalink)